濟南電纜橋架在使用的過程中應該避免哪些問題？
通過之前的介紹相信大家都已了解，電纜橋架現在已成為建筑行業不可或缺的橋架，這也說明了橋架是建筑中非常重要的角色，但是我們?cè)谑褂脴蚣艿倪^程中總會出現或多或少的問題，今天濟南電纜橋架廠家詳細與大家分享使用電纜橋架時經常出現的問題。
Through the previous introduction, I believe everyone has understood that the cable bridge has now become an indispensable bridge in the construction industry, which also shows that the bridge is a very important role in architecture, but we will always have more or less problems in the process of using the bridge. Today, Jinan cable bridge manufacturer shares with you in detail the problems that often occur when using the cable bridge.
1、電纜的所有部分均短路。這種類型的故障可能導致配電柜中的電流繼電器工作，從而嚴重?fù)p壞電纜。
1. All parts of the cable are short circuited. This type of fault may cause the current relay in the distribution cabinet to work, resulting in serious damage to the cable.
2、電纜內部短路通常是由于電纜質量差而造成的，并且外面沒有走線。
2. The internal short circuit of the cable is usually caused by the poor quality of the cable, and there is no wiring outside.
3、故障是濟南電纜橋架僅有短路，故障電纜略有損壞，但仍有明顯痕跡。
3. The fault is that the cable bridge in Jinan is only short circuited, and the faulty cable is slightly damaged, but there are still obvious traces.
4、整根電線或一根電線在某處被燒毀，嚴重?fù)p壞故障位置處的電線，故障可能是由于電流過大或電纜質量差所致。
4. The whole wire or one wire is burned somewhere, seriously damaging the wire at the fault location. The fault may be caused by excessive current or poor cable quality.
使用后應定期檢查和維護所有的機械設備。電纜橋架廠家將介紹如何維修和維護電纜橋架：
All mechanical equipment shall be inspected and maintained regularly after use. The cable tray manufacturer will introduce how to repair and maintain the cable tray:
1、測試并驗證電纜橋架套件的平衡缸及其油和墊片潤滑系統的工作狀態。
1. Test and verify the working condition of the balance cylinder of the cable tray kit and its oil and gasket lubrication system.
2、電纜橋架設備的滑塊和導軌之間經常發生摩擦。一定要進行調整以更正它。檢查連接零件和管道的潤滑質量，以確保正常運行。
2. Friction often occurs between sliding block and guide rail of cable bridge equipment. Be sure to make adjustments to correct it. Check the lubrication quality of connecting parts and pipes to ensure normal operation.
3、定期潤滑電纜橋架的齒輪部分：由于頻繁操作，齒輪箱和內部零件更容易損壞和松動。
3. Regularly lubricate the gear part of the cable tray: due to frequent operation, the gearbox and internal parts are more likely to be damaged and loose.
以上就是今天帶給大家的知識，山東電纜橋架專注行業多年，為用戶不斷的提供有價值的內容，更多內容請繼續關注我們：http://rtew.cn
The above is the knowledge brought to you today. Shandong cable bridge has focused on the industry for many years and continuously provided users with valuable content. Please continue to pay attention to us for more content: http://rtew.cn
